Products
|
DX MIDI Upgrade
DX MIDI Kit -- adds MIDI functionality to your Oberheim DX drum
machine.
|
In stock
$99 to
$149 depending on options
|
Click here for more information or to
place an order.
|
|
|
DMX MIDI Upgrade
DMX MIDI Kit -- adds MIDI functionality to your Oberheim DMX drum
machine. Updated design!: Version 1.02 now includes
a lithium battery replacement for the old NiCd battery -- no more leakage!
Also includes MIDI Thru option.
Feature
list (pdf file)
Installation instructions
|
In stock
$129.00 to $179.00 depending on options
|
Click here for more information or to
place an order.
|
|
|
MRAM
Magnetic RAM Upgrade for Oberheim DMX, DSX, DX, OB-X, OB-Xa or OB-8. In addition to eliminating
the need for a backup battery, this upgrade has the option of adding a second bank of memory
to double your machine's memory capacity. Easy installation -- no soldering.
|
In stock $179.00
each.
|
Click here for more information or to place
an order.
|
|
|
DXX2
For Oberheim DX. Replaces a single 2764 EPROM with a small circuit
board that allows switching between two samples on a 27128 EPROM, or
four samples on a 27256 EPROM.
|
In stock $20.00 to $40.00
each.
|
Click here for more information or to place
an order.
|
|
|
New DMX Voice Board
DMX voice board - same circuit design as original single EPROM voice boards. Great for restoring that
original DMX sound.
Multi-bank options available.
|
In stock: $98 or $110 with ZIF socket option
|
Click here for more information or to
place an order.
|
|
|
KB-1 (Knob Box)
This DMX accessory allows tuning the voices without having to open up the DMX
lid to reach the internal tuning knobs. Connects through the CV Molex
connector on the back of the DMX.
|
1 week lead time: $150.00
|
Click here for more information or to place
an order.
|
|
|
UniTrigger
This CV-to-MIDI converter will convert a 1 volt per octave CV input
along with a trigger signal into MIDI note-on and note-off messages. The
trigger input is velocity sensitive (to the rate of change in the trigger
voltage).
Possible applications:
- Use your analog sequencer to play a MIDI synth
- Convert an analog control such as a ribbon controller into a MIDI
synth controller
- Use with a fixed CV as a MIDI drum trigger
|
3 week lead time: $99.00 to
$199
depending on options.
|
Click here for more information or to place
an order.
|
|
|
MIDI Clock Converter
The MCC-3 converts incoming MIDI clocks into output
pulses to drive older sequencers and drum machines. The output clock rate
can be a multiple or a fraction of the incoming MIDI clock rate.
Possible applications include:
- Convert MIDI clocks (24 clocks per quarter note) into a 96
pulses per quarter note signal to control
non-MIDI Oberheim machines like the DSX, DX or DMX.
- Convert MIDI clocks into 48 ppqn or 24ppqn pulses to control
sequencers and drum machines from other manufacturers
- Convert MIDI clocks into a single (or fractional) pulse per quarter
note
"click", arpeggiator clock or tap-tempo control signal.
Available variations of the MCC-3 include "Sync-24" (AKA DIN Sync or
Roland Sync) Input or Output and a "Tap Tempo" MIDI output version.
|
Lead time: 1 week $80.00 to
$175 depending on options
each.
|
Click here for more information or to place
an order.
|
|
|
MKC-1 MIDI to Keyboard Converter
Simple MIDI control for older Oberheim and Sequential Circuits Prophet 5 synthesizers. Inserts between
keyboard switch assembly and synth control board. MIDI In and MIDI out (or MIDI thru). Note on and
note off control only -- no pitch bend or mod wheel controls.
Tested with OB-X, OB-SX, OB-Xa and SCI Prophet 5.
|
Out of stock. No estimate on lead time.
$129 to $164
|
Click here for more information or to
place an order.
|
|
|
Oberheim Accessories
Accessories and replacement parts for selected Oberheim products, including batteries, thumbscrews and knobs.
|
In stock
|
Click here for more information or
to place an order.
|
|
|
